Today I am describing you how to make a spy electric shock pen! With the help of spy electric shock pen, you can play a trick on your friend at school or work. Spy electric shock pen is not dangerous, however, you can do a nice trick using this spy electric shock: D

Supplies needed:

You’ll need one small nail, two lighter, hacksaw, and a hot glue gun.

­­

Electric element.

Electric element.

Use a small screw key to remove the piece of an electric element and remove the cord.

Stripping.

Stripping.

Remove the pen cover carefully.

Make sure to bring together all the parts of a pen.

Mark.

mark

Put the electric element, next to the pen plastic part. And put two marks one near the bottom of the electric element and the second near the element part ending.

Cutting.

Cutting.

Take a hacksaw and cut it out.

We want to use a middle part of the plastic

Remove the metal clip from the pen.

Remove the metal clip from the pen.

Use a nail and make a small hole.

Now, this part of the BIS electric wire.

Assembling:

assembling

Insert the bottom, then glue the electric element by using a hot glue gun. And stick the parts of electric element evenly to the second part.

Carefully, Press the wire through the hole.

 

Slightly, Carefully, Press the wire through the hole.the top part of the electric element.

Enter the part into the pen body.

Enter the part in to the pen body.

Then, insert the bent wire into the hole that we have made before.

Press it with the metal clip.

Press it with the metal clip.

The electric shock pen is ready!

Let me explain you how it works.

Let me explain you how it works.

Pushing the bottom and moving the pen nip out.

BIS electric element produces a spark through the metal clip.

Holding a pen in a hand gives an electric shock.

Note:

  •  You can also use this pen for writing.
  • Be careful when you use scissors, knife or any sharp tool.

For more details, visit;

Facebook Discussion