There are a number of methods to attach it to your wlan card.
If you have got a card with an exterior antenna, you’ll be able to reduce the wire, and mount a BNC connector to it which you can hook up with the antenna.
If your wi-fi card has a connector, you’ll be able to both purchase a cable that matches in your card on one facet and has a BNC connector on the opposite facet, or purchase an inexpensive exterior antenna, reduce the wire and mount the connector your self.
Instructions on how you can mount a connector can at all times be discovered on the web site of the producer. Just be sure you know who made the connector whenever you purchase one. There is one sensible tip that’s necessary to know. When soldering a connector, sooner or later you will must solder the middle pin. This will at all times depart some solder on the surface of this pin stopping it from going into the connector housing. You need to ‘suck’ it away with some solder braid, after that it simply slides in.
When you have obtained an appropriate cable, plug within the connector and provides it a check run. You’ll discover that you just’re capable of obtain way more accesspoint. In my case I obtained three instances as many accesspoints. Some individuals who noticed the film about this antenna on Metacafe made one and so they have been very enthousiastic concerning the outcomes.